Blog · Process Guides

What to Confirm When Approving Product Samples China Suppliers Send

Approving a sample is not just saying you like it. It sets the standard your bulk order will be judged against. This guide to approving product samples China suppliers send covers what to check, record and confirm.

A sample feels like a small step. No large payment has been made, and the product looks close to what you wanted. It is tempting to reply “approved, please proceed” and move on.

That message carries more weight than it appears to. Once approved, the sample becomes the reference for production. If a dispute arises later about materials, colour, function or packaging, both sides will point back to what was approved, and what was written down at the time. A careful approval protects you. A casual one can justify bulk goods you did not intend to accept.

What a sample approval actually commits you to

Approving a sample normally means three things. You accept that the sample, as received, matches the specification you want in bulk. You authorise the supplier to proceed on that basis, ordering materials, scheduling production, and applying the same construction, finish and packaging to the full quantity. And you establish the comparison point for inspection: bulk goods matching the approved sample are, in principle, conforming goods.

Approval should never cover things you have not checked. If the sample packaging was temporary, the colour was only “close enough for a sample,” or a component will change for bulk production, state those points at approval, not when the shipment arrives. Approval with written exceptions is still approval, but on your terms.

Note: A sample is often made with extra care, sometimes by a different process from bulk production. Approving it confirms the target standard; it does not by itself ensure every bulk unit will match. That is what specifications, follow-up and, where justified, inspection are for.

Approving product samples China factories make: the checklist

Work through the sample against your written specification, item by item. Do not rely on memory or on the supplier’s description of what they sent.

Materials and components

  • Are the main materials what the specification requires, type, grade and, where relevant, thickness, weight or composition?
  • Are internal components, fittings and accessories the ones agreed, or substitutes never discussed?
  • Does anything feel lighter, thinner or cheaper than specified, even if it looks similar?

Dimensions and measurements

  • Measure the sample yourself against every critical dimension, and record the actual figures.
  • Check weight where it matters for function, shipping or cost.
  • Where parts must fit other parts, lids, mounts, connectors, inserts, test the fit physically, not visually.

Function and performance

  • Use the product as an end user would: assemble it, open and close it, load it, wash it, whatever normal use involves.
  • Test against the written performance points in your specification, not a general impression that it “works.”
  • Repeat stress points a few times. A sample that fails early gives useful information at the cheapest stage.

Colours and finishes

  • Compare colour against your agreed reference, a code, swatch or previously approved sample, in daylight and indoor light.
  • Check finish consistency: coating, print quality, edges, seams and surface defects.
  • Confirm logos, artwork and print placement against the approved artwork file, including size and position.

Packaging and labelling

  • Is this the packaging specified for the bulk order, or a stand-in used only for the sample?
  • Check labels, barcodes, warnings and instructions for correct text, language and placement.
  • Confirm how units will be packed into cartons, and whether carton markings meet the requirements of your own warehouse or marketplace.

Compliance documents, where required

Some products need test reports, certificates or declarations to be sold legally in the destination market. Sample approval is the moment to confirm which documents the supplier can provide for the bulk product, what they cover, and whether they relate to this product and specification, not a different model. Resolve a missing or mismatched document before production, not at the port. Requirements vary by product and destination, and confirming them remains your responsibility as importer unless otherwise agreed in writing.

Photograph and record the approved sample

Photograph the sample from all sides, close up on materials, labels, print and any detail that was discussed or corrected. Include a ruler in dimension photographs where size is critical, and photograph the packaging as well as the product.

Keep the photographs with the specification version they relate to, dated and filed together, so “the approved sample” is something you can show later.

Create a written approval record

The approval should be a short written record, sent to the supplier and kept by you. It needs to be specific:

  • Product name and specification version approved, the dated document or drawing the sample was made to.
  • Date of approval and the name of the person who approved it.
  • A clear statement: approved as received, or approved with listed changes, each described.
  • Any points explicitly not covered, such as packaging to be confirmed separately.
  • What happens next: production to proceed to this standard, with no material, component or finish changes without your written agreement.

Share the same record with anyone coordinating the order, so everyone works to one version. Our Sample & Product Development Coordination service is built around this discipline: specifications, revisions and a documented approval before production.

Revision rounds and version control

Most samples need at least one revision. Treat each round as a new version. When you request changes, list them in writing, numbered, against the current version. When the revised sample arrives, check first that each change was made, then re-check points that were already correct, revisions occasionally fix one detail and disturb another.

Label physical samples with version and date, and keep only one clearly identified “approved” reference. Mark superseded samples clearly so they cannot be mistaken for the standard later, by you, an inspector, or the supplier.

Common mistakes

  • Approving from photographs alone. For visual, low-risk items, photographs may be proportionate. For spec-critical products, where dimensions, materials, fit or performance decide whether goods are saleable, photographs cannot show weight, feel, fit or function. Have the physical sample in hand.
  • Approving a sample that differs from the bulk specification. If the sample uses a different material, component or packaging from bulk production, approving it approves the wrong thing. Get the difference stated in writing, or get a sample that matches the bulk specification.
  • Keeping no retained reference sample. If your only sample is sent back, consumed in testing or lost, you have no baseline when bulk goods arrive. Retain at least one approved sample, labelled and stored, until the order is complete and accepted.
  • Approving in a chat message with no detail. A single word in a message thread is hard to rely on later. Send the approval record as a document or email that can be found and quoted.

Important: If you cannot judge a technical point in the sample, say so before approving and arrange testing or expert review for that point. An approval given on a point you never checked is still an approval.

A proportionate approach

Not every product needs the same depth of checking, but the principle should not change: check against a written specification, photograph the sample, record approval with version and date, and keep a retained reference. Those habits cost little at sample stage and are difficult to recreate later.

Golden samples and sealed references

Once a sample is approved, it should become a fixed physical reference. Many buyers mark the approved sample with a signed label and the date, keep one unit themselves and ask the factory to keep an identical unit on its production floor. This is often called a golden sample. When production starts, and again at inspection, goods are compared with that reference rather than with anyone's memory.

When approving product samples China factories have made by hand, ask whether the bulk order will use the same materials, machines and production line. A sample made in a workshop can be harder to repeat in mass production than one made on the real line.

Approving product samples China factory demonstration during a visit

A simple approval record

FieldWhat to record
Product and versionName, model and revision number of the sample
Specification referenceThe specification sheet version the sample was judged against
ResultsPass or fail for each checklist point, with measurements
Accepted deviationsAny difference you agreed to accept, described precisely
PhotosFront, back, details, packaging and labels, with a scale reference
ApprovalWho approved, on what date, and how the factory confirmed receipt

Send the record to the supplier and ask for written confirmation that production will follow it. That confirmation is what turns your approval into a shared standard.

Sample types and when to approve them

Sample typePurposeApprove it?
Stock sampleShows general quality of an existing productUseful for shortlisting, not for final approval of a custom order
PrototypeTests a new design or functionApprove the design direction, not the production standard
Pre-production sampleMade with production materials and processYes, this is the sample to approve before bulk
Production sampleTaken from the first units off the lineUse it to confirm bulk matches the approval

Approving the wrong type of sample is one of the most common causes of disputes. Make sure everyone agrees which sample is the approval sample before it is made.

Approving packaging separately

Packaging is often produced by a different printer from the product itself, so it can change without the factory noticing. Approve printed packaging, labels, inserts and carton marks as their own items, with photos and the final artwork files attached. A perfect product in the wrong box can still be rejected by a retailer or delayed at customs.

Tolerances: how close is close enough

No production process makes every unit identical. For each important measurement, agree a tolerance, such as a range for length or weight, and record it in the specification. Without tolerances, small natural differences become arguments at inspection. With them, approving product samples China suppliers send becomes a measurable decision rather than a matter of opinion.

When you cannot hold the sample yourself

Sometimes time or customs make it impractical to ship every sample to you. In that case, a sample can be checked in China by someone you trust, against your written checklist, with detailed photos, measurements and a live video call where you can ask for specific angles and tests. This is not quite the same as holding it yourself, so it works best for products you already know well or for revisions of a sample you have seen.

From approval to inspection

The approval record is not only for production. It is also the basis for the inspection before the balance payment. Inspectors compare bulk goods with the approved sample and the agreed tolerances, usually using random sampling based on ISO 2859-1. The clearer your approval record, the more objective the inspection result will be.

Quick answers

Who should approve the sample?

The person responsible for quality in your business, ideally the same person who will judge the bulk order.

Can I approve with small changes?

Yes, if the changes are written down precisely and the factory confirms them. Otherwise, request a revised sample.

How many units should a sample include?

Two or three units help you check consistency, and let you keep one as a reference while testing another.

Should I pay the deposit before approving?

It is safer to approve first. When approving product samples China factories make before any bulk deposit, you keep the freedom to revise or change supplier without losing money. Once the deposit is paid, production planning starts and changes become slower and more expensive.

What if the supplier changes something after approval?

Any change to materials, components, packaging or process after approval should be reported to you and approved in writing before production. Put this requirement in the order terms so the factory knows it in advance.

Working through samples for a new product?

Working through samples for a new product? Send us your specification and we can help with approving product samples China suppliers send.

Similar Posts

Leave a Reply